Engine Repairs North West

Fix My Engine

9am - 5pm
Unit 4, 245 Coe Street, Bolton, BL3 6BU

Fix My Engine Engine

We Specialise in Engine reconditioning, Crankshaft grinding, surface grinding and more. We are a family run business and have been in business for over 20 years. So if you require a free quote or just some advice on your engine problems then give us a call on 01204 362777.

We are based in Bolton, Lancashire and cover the whole of the North West for engine repairs. We have a good customer base and really good feedback. As well as engine repairs we do run and operate an online shop, the link can be found above. We except Paypal, Credit and Debit card.

Engine Repairs - Fix My Engine Bolton

We have a full range of engine repairs, for more info please call 01204 362777

Give us a call today

01204 362777

Services We Offer

Service: DPF Cleaning

Fixmyengine recover up to 98% of the original efficiency

Our engineers will perform a cleaning, inspection, and record any defects.

Service: Cylinder Boring

If you need this service please contact us on 01204 362777.

Service: Engine Inspection

All machined components are subject to rigorous inspection procedures

Remember if you need your engine fixing call us today on 01204 362777

DPF Cleaning Service

Fixmyengine recover up to 98% of the original efficiency using DPF cleaning, saving £££££’s on a replacement for all vehicles and machinery.

Our DPF cleaning service at is capable of taking your diesel particulate filter and cleaning it to improve performance. It is important understand why these filters need to be clean.

There are two chambers. One of which works to oxidize some of the NO gas in the exhaust, while the other chamber destroys the soot. Some of this ash remains in the filter, and if it is not cleaned on a regular basis, this can reduce the effectiveness of the DPF and ultimately the performance of your vehicle.

Our engineers will perform a cleaning, inspection, and record any defects. Within no time at all, we can have the diesel particulate filter restored to 90% or better of the new condition. Why spend the money on a new DPF when the easiest solution is to have a clean? This should be part of your routine car care, and can increase fuel economy, horsepower, and overall performance. It can lower maintenance costs, which is always a great thing.

We are here to assist you, so call us now for a quotation, to book in or if it is just some advice you require. Call us today on 01204 362777

Cylinder Boring

Cylinder Blocks for boring are set up on a vertical boring machine . Each cylinder is checked with a cylinder bore gauge and on completion is transferred to a honing machine for finished sizing. We can also bore for, and fit liners.

How Cylinders Wear A piston has two sides, a thrust side and a relief side. During a four-stroke engine’s operation, pistons get pushed down on the stroke cycle. This puts force on the front of the cylinder wall, which is the thrust side. Over time, this creates an oblong, or “out-of-round” shape in the cylinder. To rebuild an engine to factory specs, the cylinder gets bored out, until it’s perfectly round again, to the next oversize piston size.

Engine Block Skimming

Cylinder blocks require refacing or “skimming” following some sort of engine failure which results in the block surface becoming overheated. Any distortion caused by these stresses will need to be removed to ensure the new head gasket has a perfect surface on which to seal.

We offer a full block skimming service guaranteed with quality. For more on this service give us a call on 01204 362777.

Call Today 01204 362777

Need help? Contact us

Fix My Engine
Need help? Message us now.